N-Plexer · 18 cf · 16 Slots
N-Plexer: High Power RF Burn-In
The N-Plexer is Delta V's High power RF chamber — 18 cf with 16 slots, built for RF-biased burn-in at real power.
High Power RF
RF-Biased Burn-In at Real Power
RF-biased HTOL with wideband monitoring from 700 MHz to 8.4 GHz is Delta V's core specialty, with RF HTOL platforms extending to 35 GHz for radar, EW and mmWave programs.
Frequency-domain monitoring runs while the device is under bias and at temperature, for AESA radar, electronic warfare, 5G mmWave and satellite payload components.
Chamber
18 cf cavity.
Slots
Sixteen slots, High power RF.
RF Monitoring
Per-DUT in-situ RF monitoring, with a path to 35 GHz.
Per DUT
Up to ~500 W dissipation per DUT, RF / DC.
Liquid-Cooled
Liquid-cooled GaN DC RF HTOL to 22 kW.
Control Software
Same in-house control software as every chamber.
Same Platform
One Hardware and Software Core, Every Chamber
Every Delta V chamber runs on the same in-house hardware and BIOS, our sixth-generation TCP/IP controlled automation software for real-time monitoring, data acquisition and reporting across thousands of devices, modules and fixtures. Source is owned and retained at Delta V and never distributed to clients.
Chamber, power, drivers, burn-in boards, BOSS & Stager board certification and BIOS software are all engineered and built in Richardson, Texas — so moving a program from one chamber size to another does not mean starting over.
Power
Supplies sized to the bias condition, with headroom for high-dissipation GaN DC, SiC and high-power logic.
Drivers
Stimulus, pattern and RF drive delivery to every slot in the cavity.
Burn-in Boards
Custom BIBs designed per spec, with real-time heartbeat monitoring.
BOSS & Stager
Proprietary board certification and staging: every board proven good before it holds a program hostage.
BIOS Software
Sixth-generation in-house control software with GUI test programming, serial-number tracking and enterprise database reporting.
Turnkey Service
Or skip the capex: send devices to Richardson and we run the burn-in and return the data.
